MrAngry
05-05-2010, 08:11 AM
Make:Honda
Model:Civic Si Hatchback
Year:92
2 or 4 door:3
Miles:165000 on the body 800 on built D16A6 with Z6 head motor
Transmission:MT
Exterior color:Black
Interior color:Black & Grey
Location:Boise
VIN #:
Price:$5500 OBO
Contact Information:Shannon @ 585-7695
Modifications:Built D16A6 with Eagle Rods and Forged SRP Pistons, ARP Head Studs, ARP Rod Bolts, ACL Race Bearings, New Honda Oil Pump, New Honda Water Pump, New Honda Timing Belt, New Honda Head Gasket, D16Z6 Head, Felpro Intake Gasket, Skunk2 Intake Manifold, EVO 560cc Injectors, Custom Built Medusa Exhaust Manifold (Built By Hai Tran) 67 Trim T3T4 Ebay turbo, 50mm Waste Gate (I'm sure Its a 50mm?) Waste Gate Married Into 2.5" Down Pipe that goes to 3" at the oil pan and up again to 4" from the firewall back into a 4" in 4" out magnflow (welded up by Hai Tran), Running Dx Tranny with 7lb Fly Wheel and Unsprung Clutch Masters 6 Puck, HUGE FMIC with 50mm Blowoff valve welded into the FMIC (Welded by Hai Tran) running base map by Kno right now, Also Has Relocated P28 With Motes Data Logger and Ostrich running Ectune, Has 5" tach 2.5" Boost Gauge 20lb, 2.5" Oil Pressure gauge, Custom Center Pod on the Dash With AEM Wide Band and extra Spot for 30lb Boost Gauge, Comes with MAC EBC and Chip Set for the ECU, Black Headlights and Amber corners and HID conversion, pioneer speakers, Ipod/Iphone Deck with Bluetooth for Handsfree calling, 12" Rockford Sub. Car should run in the 11's.
Additional Comments: Has had the Right Quator panel replaced
Does it have a clean title? Yes
How are the tires? Brand New Perllies wrapped around New 2010 Motegi's
Does it come with any extra parts? Stock Si front seats and A6 head that has had a 3 angle valve job
Why are you selling? I want a Subaru
Pictures:
http://i714.photobucket.com/albums/w...t/32122c09.jpg
http://i714.photobucket.com/albums/w...t/a3a29cff.jpg
http://i714.photobucket.com/albums/w...t/3ad0853a.jpg
Model:Civic Si Hatchback
Year:92
2 or 4 door:3
Miles:165000 on the body 800 on built D16A6 with Z6 head motor
Transmission:MT
Exterior color:Black
Interior color:Black & Grey
Location:Boise
VIN #:
Price:$5500 OBO
Contact Information:Shannon @ 585-7695
Modifications:Built D16A6 with Eagle Rods and Forged SRP Pistons, ARP Head Studs, ARP Rod Bolts, ACL Race Bearings, New Honda Oil Pump, New Honda Water Pump, New Honda Timing Belt, New Honda Head Gasket, D16Z6 Head, Felpro Intake Gasket, Skunk2 Intake Manifold, EVO 560cc Injectors, Custom Built Medusa Exhaust Manifold (Built By Hai Tran) 67 Trim T3T4 Ebay turbo, 50mm Waste Gate (I'm sure Its a 50mm?) Waste Gate Married Into 2.5" Down Pipe that goes to 3" at the oil pan and up again to 4" from the firewall back into a 4" in 4" out magnflow (welded up by Hai Tran), Running Dx Tranny with 7lb Fly Wheel and Unsprung Clutch Masters 6 Puck, HUGE FMIC with 50mm Blowoff valve welded into the FMIC (Welded by Hai Tran) running base map by Kno right now, Also Has Relocated P28 With Motes Data Logger and Ostrich running Ectune, Has 5" tach 2.5" Boost Gauge 20lb, 2.5" Oil Pressure gauge, Custom Center Pod on the Dash With AEM Wide Band and extra Spot for 30lb Boost Gauge, Comes with MAC EBC and Chip Set for the ECU, Black Headlights and Amber corners and HID conversion, pioneer speakers, Ipod/Iphone Deck with Bluetooth for Handsfree calling, 12" Rockford Sub. Car should run in the 11's.
Additional Comments: Has had the Right Quator panel replaced
Does it have a clean title? Yes
How are the tires? Brand New Perllies wrapped around New 2010 Motegi's
Does it come with any extra parts? Stock Si front seats and A6 head that has had a 3 angle valve job
Why are you selling? I want a Subaru
Pictures:
http://i714.photobucket.com/albums/w...t/32122c09.jpg
http://i714.photobucket.com/albums/w...t/a3a29cff.jpg
http://i714.photobucket.com/albums/w...t/3ad0853a.jpg