clutch help!!

[bullet]

well after replacing part of my clutch line i needed to bleed the line. 8 attempts later and i still cant get it to get inof pressure it only had about 1/2 of play b4 and now i cant get it to gain pressure, it wont even start to engage until after 2 inches.. any help would be very appreciated

[Jdmitr]

There are some tricks to getting all the air out. Make sure your lines are tight. Accords are a huge pain to bleed and I usually have to push the piston in the slave in while it is extended to help push some of the trapped air out and back to the reservoir. The other way is to use a power bleeder. GL